Modern, based on water acrylic dispersion paint intended for performance of decorative, glaze (not fully covering) paint coatings inside the buildings. It allows for unlimited possibilities of shaping individual decorations adjusted to specific interior in terms of colour scheme and style. It allows for the performance of coatings with various paint effects inspired with the decorator’s imagination and skills. It is used for performing decorative finish coats in rooms of public utility premises (such as hotels, shops, restaurants, offices and conference rooms) as well as in representation residential rooms (such as living rooms). It is especially recommended for painting rough surfaces of attractive texture (such as thin coat renders of modelled or smooth texture). Intended for both mineral substrates (such as traditional cement renders, cement-lime renders and thin coat mineral renders) and those covered with well set and bound polymer-based coats.
Before the application of lazure paint, the substrate should be painted once with PROLATEX.
ca. 0.10 l/m² (depending on the assumed decorative effect)
Temperature of application (air and substrate)
from +5°C to +25°C
ca. 9 pH
Single-use plastic packaging of 1 and 2.5 l
The product should be stored in its sealed packaging in a cool, but frost-protected room. After opening and using some of the contents, the packaging should be used up as soon as possible. The remainder of the product should be then used up as soon as possible
Originally sealed products have a 12-month shelf life from the date of production (this is printed on the side of the packaging)
SUBSTRATE PREPARATION: Apply to a sound and clean substrate (without cracks and delaminations), degreased, dry, and free of biological contamination or chemical efflorescence. The substrate should be free of algae/fungi growth. In case of microbial contamination, the substrate should be cleaned with a power washer. ALGIZID to be applied as per product manual. Discolourations, nicotine stains and efflorescences caused by water stains should be painted first with MILAMAT insulation paint. Any loose layers not bound to the substrate (i.e. loose render or flaked coatings) should be removed. The remains of colour wash or limewash should be thoroughly removed and the substrate washed with water. Old and/or dirty substrates should be washed off and degreased with water and CLEANFORCE agent. For uneven substrates, first use KOMBI FINISZ levelling compound and then level the surface with PROFINISZ spackling paste. Small unevenness can be levelled out with PROFINISZ spackling paste. Absorbent substrates should be primed with BUDOGRUNT ZG before spackling paste application. Fresh cement renders and cement-lime renders may be painted after 3-4 weeks of curing, plasters after 2 weeks, while the so-called drywall construction can be painted directly after polishing and dust removing.
PRIMING: Before the paint application, the substrate should be painted once with PROLATEX (white colour is most often applied). Typical drying time ca. 3 h (20°C, 55% RH). When base paint applied on the substrate is completely dry, lazure paint may be applied.
PAINT PREPARATION:The packaging contains a ready-to-use product. If necessary, the paint may be diluted with a small amount of water (by adding max. 5% of volume). Quantity of added water may vary depending on the substrate type, weather condition and application method. The paint should be thoroughly mixed directly before use.
APPLICATION: Depending on the assumed decorative effect, paint may be applied on the substrate in one or two layers with the use of various painting tools (such as brush, roller, sponge, pad, cloth, paint glove or by means of spraying). Another layer of paint should be applied after the first one dries. As necessary, the subsequent paint coatings may differ with colour and application technique. The fresh lazure paint coating is easy to process and the final effect depends only on the skills and imagination of the contractor.
DRYING: Typical drying time ca. 3 h (20°C, 55% RH). Note: Coat setting time may be longer due to low temperatures and high relative humidity. After painting, closed rooms should be aired until the specific smell disappears.
USEFUL HINTS: To avoid colour differences, a single batch product should be used on a single application / architectural element. To be applied on days with temperatures above +5°C. All tools to be cleaned with water after finishing work.